New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Encino, CA | Juniper Windows Woodland Hills
We service Therma-Tru entry doors, French doors, and Pulse sliding patio doors across Encino, and we do it as an independent provider, not a factory-authorized dealer. That matters because our recommendations aren’t shaped by a manufacturer’s sales targets. They’re shaped by what we see on job sites from Rancho Street to the stretches south of Ventura Boulevard, where decade-old Therma-Tru doors take a serious beating from San Fernando Valley sun. Call (831) 508-3441 for a free estimate, and we’ll give you a written price before anything gets touched.
Why Encino Residents Choose Us for Therma-Tru Service
Sean Mackey, our owner, spent years studying building construction technology at Los Angeles Trade-Technical College, and he’ll be the first to tell you that a door’s weatherstrip isn’t a small detail. It’s the difference between a sealed entry and a monthly cooling bill that climbs every August. We’ve worked on enough Therma-Tru Classic-Craft, Fiber-Classic, and Pulse units in Encino to know exactly where they fail under local conditions and how to fix the problem without replacing parts that still have life in them. When the time comes for a full upgrade, our Encino Window Replacement team handles the entire process.
That familiarity is why Encino homeowners call us instead of a general handyman. We know which hinge sets fit the heavier decorative glass doors common in Mediterranean-style builds. We know that south-facing door slabs on Ventura Boulevard adjacent lots take the worst of the afternoon glare. And we stock the weatherstrip, adjustable sills, and common hardware that get these doors closing clean again, often the same visit.
We’re part of the Relay Home Co. family, founded in 2001, with eight product lines on the shelf and a 365-Day Done Right Promise on every job. If the repair isn’t right, we make it right, parts and labor, for a full year. That’s not a tagline. It’s printed on every invoice. Explore our Therma-Tru sales & service page for the full picture of what we handle.
Common Therma-Tru Windows & Doors Problems We Solve in Encino
- Warped or swollen door slabs on south-facing exposures. Encino summers regularly push past 90°F, and sustained heat on fiberglass can cause the slab to expand enough to bind at the latch. We’ve fixed dozens of Classic-Craft doors where the homeowner couldn’t deadbolt at night because the strike edge had shifted.
- Cracked or faded factory finishes. UV exposure here is brutal on door surfaces. We regularly see Classic-Craft and Fiber-Classic doors where the finish has cracked away to reveal white fiberglass beneath, especially on west-facing entries that catch the full afternoon sun. We can color-match, strip, and re-coat so the door looks close to new without replacing the slab.
- Failed weatherstripping and worn corner seals on Pulse sliders. The dry heat and fine dust from the hills dry out rubber seals faster than coastal air ever would. When seals go, conditioned air leaks out and dust gets in. We replace the compression weatherstrip and corner pads with OEM-compatible parts that seat correctly.
- Loose or sagging hinges on heavy decorative glass doors. Mediterranean-style Encino homes often spec entry doors with oversized glass inserts, and that weight eventually pulls hinges out of alignment. We re-set or replace hinge hardware, re-square the slab, and adjust the reveal so the door closes without dragging.
- Warped tracks and flat rollers on older sliding doors. Many pre-1970 Encino homes still have original aluminum-frame sliders. After a few hot summers, the tracks warp and the rollers flatten, making the door feel welded shut. When a homeowner wants a Therma-Tru Pulse as the upgrade, we’re handling the rough opening work too.
Therma-Tru Service in Encino: What Local Conditions Mean for Your Equipment
Here’s the thing about Encino that doesn’t show up in a Therma-Tru brochure. The original sliding doors and side entries on those 1950s and 1960s ranch homes south of Ventura Boulevard were built for single-pane glass and thin aluminum frames. When one of those doors gets replaced with a modern Therma-Tru fiberglass unit, the rough opening almost always needs to be widened and re-framed. That’s not true in Sherman Oaks or Tarzana to the same degree, where a bigger share of stock is newer construction or smaller lots with different layouts. It’s a local pattern we’ve come to expect: nearly every Therma-Tru door replacement south of Ventura involves retrofitting the opening for today’s deeper frames, not just swapping the slab. Sean puts it plainly: “Get the numbers right the first time, or you’re caulking over somebody else’s mistake.” That’s why we measure, note the framing, and write the exact scope before we touch a wall. Whether you’re on the flats near Libbit Park or tucked into a hillside pocket above Hayvenhurst, we account for what the house was built with before we order anything.
Therma-Tru Models & Products We Service in Encino
We work on Therma-Tru Classic-Craft Mahogany Collection doors, Fiber-Classic Oak Collection doors, Smooth-Star fiberglass doors, and Pulse sliding patio doors. Our parts approach is honest and practical. When genuine Therma-Tru hinges, weatherstrip, or adjustable sills are available, we use them. When a color-matched trim piece is out of production or an older lock mechanism is no longer made, we source aftermarket components that fit and perform the same, and we tell you upfront before we install them. If we find rot, structural damage, or a slab that’s too far gone, we’ll say so plainly and give you the repair number and the replacement number side by side. Entry doors, French doors, and exterior doors are the bulk of what we do in Encino. Learn more about our Encino service area coverage and scheduling.
Therma-Tru Service Pricing in Encino
We lead with the number because you shouldn’t have to call just to get a ballpark. Weatherstripping replacement on a single Therma-Tru door typically runs $120 to $250. Hinge adjustment or replacement on a sagging door runs $150 to $350. Color-match refinishing on a faded Fiber-Classic or Classic-Craft slab runs $500 to $1,200 depending on size and condition. Full Therma-Tru door replacement, including rough opening work, generally lands between $2,200 and $5,500 installed, with south of Ventura Boulevard retrofits often at the higher end because of the framing work those older ranch openings require. Every estimate includes the exact line items, in writing, before you approve anything. We don’t change the number at the door. Call (831) 508-3441 and we’ll walk you through your specific door and what it’ll take to get it right.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Encino
Summer heat causes fiberglass door slabs to expand, and on unshaded south-facing entries, that expansion is enough to shift the slab against the latch and strike edge. Winter temps don’t create the same thermal load, so the door feels fine. The fix is usually a strike adjustment, light planing of the edge, or hinge correction, not a new slab. Call (831) 508-3441 for an exact diagnosis and quote.
Yes, we can color-match the original stain and re-coat the slab so the repair blends with the rest of the entry. We sample the existing finish, account for UV fade, and build the color back in layers. It’s not a spray-and-pray job. We’ve matched finishes on Fiber-Classic Oak doors across Encino, including homes where half the door sat in shadow and the other half took full afternoon sun.
Usually it’s both. The track gets warped by heat and the rollers flatten from weight and time, and once the roller surface gives out, the door drags every inch of the way. We inspect both, clean and re-align the track where possible, and replace rollers with units matched to the Pulse frame. If the track itself is too far gone, we’ll tell you and give you a price for full replacement instead of throwing parts at a losing cause.
Repair is worth it if the slab is sound and the problem is weatherstripping, hinges, or a finish issue. Replacement beats repair when the core has rot, the slab is cracked through, or the frame has moved enough that the door will never seal cleanly. We give you both numbers in writing. You decide. If the repair later fails, we come back free of charge, that’s the 365-Day Done Right Promise.
A UV-blocking film or exterior shade is the most effective step, and periodic re-coating of the fiberglass finish keeps the surface from cracking away to white. We also check the weatherstripping at the astragal where the two French door panels meet, because that’s the first seal to fail under direct sun. For a specific price on French door service in your part of Encino, call (831) 508-3441 and we’ll give you the figure over the phone.
Service Areas Near Encino
Beyond Encino, we run Therma-Tru service calls into Therma-Tru service in Van Nuys, Therma-Tru service in Woodland Hills, along with Canoga Park, Topanga, and Pacific Palisades. If you’re on the west Valley side and need a Therma-Tru door looked at, we’re a short drive out.
Book Your Therma-Tru Service in Encino Today
A sticky Therma-Tru Classic-Craft or a sluggish Pulse slider doesn’t fix itself, and the Encino heat will expose every weak seal. Call (831) 508-3441 for a free estimate with a written price before the work starts. Same-day service is often available for hinge, weatherstrip, and roller failures in the Encino area.
Written by Sean Mackey, Owner at Juniper Windows Woodland Hills, serving Encino since 2001.
Six Reasons Homeowners Choose Juniper Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.