New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Encino
Window installation in Encino usually runs $850 – $2,400 per opening for a retrofit insert, and $1,400 – $4,200 for a full-frame replacement when the existing frame is rotted or undersized. That’s the real range for this market, with most mid-century ranch homes landing around $1,800 per window once you factor in impact-rated glass and code-triggered framing fixes. We’re Juniper Windows Woodland Hills, and our crews serve Encino daily. When you call (831) 508-3441, a live person answers. We’ll walk you through the actual conditions you’re likely dealing with before we ever set foot on your property.
Why Juniper Windows Woodland Hills Is Encino’s Preferred Window Installation Company
Encino homeowners keep calling us back because we treat a 1963 ranch on Hayvenhurst differently than a 2000s Mediterranean build near Lake Balboa. The walls hold different surprises. Most companies quote a window replacement without asking what’s behind the stucco. We ask first, because in Encino we already know the answer is often original 1950s wiring, a rotted sill, or a header that’s too small for today’s code. Our Window Installation team shows up with that expectation and a written price that accounts for what’s likely in the wall, not just what’s visible from the curb.
Every Encino job gets the same standard: a written line-item quote before any work begins, background-checked technicians in uniform, and a live arrival time you can track like a rideshare. Sean Mackey leads the team, and the standard he enforces is simple: if the job isn’t done right, the 365-Day Done Right Promise covers it in writing, parts and labor, for a full year. No estimate that morphs into a surprise invoice at the door.
Window Contractor in Encino
Window contractor work in Encino means more than swapping sashes. On homes south of Ventura Blvd built between 1950 and 1980, it means opening the wall and dealing with what’s actually there: undersized headers, failed flashing, aluminum tracks that haven’t moved since the Reagan administration. We approach every Encino project with an inspection-first mindset. A full-frame replacement in this market typically runs $1,400 – $4,200 per opening. A retrofit insert runs $850 – $2,400. The difference comes down to what we find once the old window comes out.
Permit-Triggered Code Upgrades, Handled in Writing
When a new window changes rough opening dimensions or the existing header fails inspection, the City of Los Angeles permit triggers electrical and structural corrections. That’s normal. The problem is when a contractor discovers it mid-job and hits you with a verbal change order. We don’t work that way. Any surprise gets documented, priced, and approved in writing before we touch it.
Inspection Before the Quote, Not After the Demo
We inspect the rough opening, check the sill for rot, and look at what’s in the cavity before we finalize the number. That pre-work finds most hidden problems on the front end. When it doesn’t, our written change-order process keeps the job moving without turning your remodel into an open-ended tab.
Window Installers in Encino
Window installers in Encino deal with a specific housing stock: sprawling one-story ranches with eight, ten, sometimes sixteen openings per house, many of them original single-pane aluminum sliders that leak air and seize in the heat. Our crews know these homes because we work them every week. A ranch off Louise Avenue with ten windows and two sliding glass doors can run $28,000 – $52,000 with impact-rated replacement. Smaller jobs, like a three-window bedroom retrofit, start around $2,500.
Retrofit Inserts vs. Full-Frame Replacement
If the existing frame is square, dry, and code-compliant, a retrofit insert is the faster, cheaper path. If the header is undersized or the sill has rot, a full-frame replacement is the only safe option. We’ll tell you which one your house needs, and we’ll show you the evidence in photos.
Impact-Rated Glass Without a Full Wall Rebuild
You can get Miami-Dade impact-rated glazing without gutting the wall. We size the new impact unit to the original rough opening and install it as a full-frame replacement that preserves the exterior dimensions. No stucco repair, no re-sheathing, no change to the home’s footprint.
Trusted Brands We Service in Encino
We stock and install three brands that cover the range of what Encino homes actually need. PGT builds impact-rated windows that carry Florida Product Approval and Miami-Dade NOA ratings, which is what a home on a hillside lot above Ventura Blvd wants when the Santa Anas kick up. ViewLux gives us a clean, modern option with narrow sightlines for homeowners who want a contemporary look on a mid-century ranch. Therma-Tru handles the doors: fiberglass entry systems that hold up under Encino’s UV without swelling, warping, or fading the way wood does. When we service these brands locally, parts come from inventory, not a three-week backorder.
Common Window Installation Problems We See in Encino Homes
- Seized aluminum sliders on pre-1970 builds. The tracks warp and the rollers flatten after one hot summer, rendering the door a permanent wall. We replace them with impact-rated Low-E units sized to the opening so you skip a full wall rebuild.
- Framing rot hidden behind stucco. Water intrusion from failed original flashing goes unnoticed for years. When the drywall and stucco come off, the sheathing is gone and the jamb flexes. We re-sheath and set the new frame with pressure-treated sill plates before the window goes in.
- Old aluminum sashes that bind in the frame. Encino’s 90°F-plus summer days warp thin aluminum. A retrofit insert installed without full shimming and sealing leaks air and jams within a year. We shim, seal, and test every opening.
- HOA restrictions on wood-clad windows. Several Encino hillside and ranch-style HOAs require architectural review for anything visible from the street. We know which product lines pass review and which trigger a denial, and we handle the paperwork for you.
Pricing for Window Installation in Encino, CA
Retrofit inserts in Encino run $850 – $2,400 per window. Full-frame replacements run $1,400 – $4,200. Sliding glass doors are $2,800 – $6,500. Impact-rated glass adds 35 – 50% over standard Low-E insulated units. What pushes a job to the top of the range is structural: undersized headers needing replacement, rotted sills, re-sheathing behind stucco. We write allowances into every contract for exactly these items, priced up front. Call (831) 508-3441 and we’ll give you a written line-item quote after an inspection. That estimate is free.
We Also Serve Cities Near Encino
Our crews run installs throughout the west Valley. If you’re in Tarzana, Reseda, Winnetka, or Woodland Hills, you get the same written-price standard and the same Window Installation in Encino team approach, just dispatched from our Los Angeles office to your door. Call us and we’ll confirm coverage for your street.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Encino
No. We size the new impact-rated unit to the original rough opening and replace the door as a full-frame swap. The header stays if it’s sound. If it’s not, we write a change order for a new header and PT sill and get your sign-off before continuing. Call (831) 508-3441 for an inspection.
Only if the new window changes rough opening dimensions or the existing header fails inspection. That triggers the City of LA’s code requirements for electrical and structural correction in the affected opening. We document the condition before work starts and price any expected upgrades into your written quote. No verbal surprises.
We inspect the header size, sill condition, and rough opening dimensions before quoting. Impact-rated units weigh more than standard glass, so an undersized header won’t pass. If we find rot or an undersized header, the full-frame replacement quote includes the structural correction. You get photos of what we found.
We spec impact-rated glazing with a wood-clad interior and a finish that passes architectural review. Some HOAs accept fiberglass-clad wood hybrids. We know which ones get approved in Encino’s hillside communities and we draft the submittal package for you. The glass meets Miami-Dade; the exterior looks like the original.
Most jobs don’t open the wall beyond the window cavity. We remove the old sash and frame, inspect the opening, and set the replacement within the existing footprint. Walls only come apart when structural or electrical corrections are required. When that happens, the scope is documented, priced, and approved in writing before we proceed. Call (831) 508-3441 for a free estimate and we’ll tell you exactly what your house will need.
Written by Sean Mackey, Owner at Juniper Windows Woodland Hills, serving Encino from our Los Angeles office.
Six Reasons Homeowners Choose Juniper Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.