New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Encino, CA | Juniper Windows Woodland Hills
We provide independent CGI windows and doors service across Encino, from full-frame replacements to roller swaps on 1980s sliding doors. The one thing that separates our CGI work here is that we know exactly how Encino’s heat cycles and HOA design rules interact with CGI hardware, so we fix the root cause instead of the symptom. We’re Juniper Windows Woodland Hills, part of the Relay Home Co. family founded in 2001, and CGI sales & service is a core specialty of ours. Call (831) 508-3441 for a free estimate on any CGI window or door in Encino.
Why Encino Residents Choose Us for CGI Service
Sean Mackey owns Juniper Windows Woodland Hills, and he’d tell you the same thing on a job site that he’d put in writing: CGI hardware is precise, and it fails in predictable ways when Encino’s climate gets involved. Sean studied building construction technology at Los Angeles Trade-Technical College before spending the better part of two decades measuring rough openings and fitting frames across the west Valley. That background matters when you’re deciding whether a 30-year-old CGI frame is worth saving or whether Encino Window Replacement actually costs you less over time.
We work on CGI windows and doors daily in Encino, so our techs know the frame assemblies, roller systems, and glazing packages these products use without any factory affiliation. We’re an independent service provider, not a manufacturer-authorized shop, which means we call it straight: if a repair makes sense, we say so. If a replacement beats repeated fixes, we say that too, with a written price before anything starts. Every job also carries the 365-Day Done Right Promise, parts and labor, in writing.
Common CGI Windows & Doors Problems We Solve in Encino
- Sliding glass door rollers that flatten and jam. Encino’s summer heat regularly pushes past 90°F, and older CGI 800 Series and Estate Collection doors with nylon rollers take the worst of it. The rollers literally deform and melt into the aluminum track, which is why so many pre-1990s doors in Encino need a pry bar to move at all.
- Glazing bead seal failure on south-facing picture windows. Strong UV exposure degrades the glazing beads on CGI picture windows over time. When those seals crack, haze and condensation build between the panes. On south-facing walls in Encino, we see this after 12 to 18 years of direct sun.
- Casement crank operators that strip out. Encino’s dry, dusty air works its way into operator housings, and when a sash warps slightly after a hot spell, homeowners force it open. That strips the gears fast. We replace CGI crank mechanisms and realign the sash so it opens cleanly without the fight.
- Perimeter weatherstripping that shrinks and gaps. CGI 5700 Series double-hungs in Encino lose their perimeter seals after enough Santa Ana wind cycles. The gaps are small, but you’ll feel the draft on a December night in Encino when the wind picks up.
- Discontinued model parts and OEM sourcing. Many Encino homes built before 1990 have CGI units that are no longer in production. We source genuine CGI parts where available, and for discontinued models we use precision-matched aftermarket rollers, balancers, and seals that match OEM specs.
CGI Service in Encino: What Local Conditions Mean for Your Equipment
Encino’s HOA design review boards along Ventura Blvd frequently require wood-clad exterior finishes on any replacement window. That’s not a preference, it’s a condition of approval, and it’s not something a generic CGI page will warn you about. Our CGI insert and full-frame installs in those zones almost always use custom brickmold and trim to satisfy architectural guidelines that neighboring Sherman Oaks rarely enforces. We’ve done enough of these to know how the review board will read a submission, so we spec the brickmold details up front rather than waiting for a rejection letter. If you live in Encino’s hillside areas or any HOA-governed street near Ventura Blvd, plan for this before you order a single window.
Beyond the HOA barrier, Encino’s housing stock shapes the work differently than other cities. Many homes are single-family ranches built in the 1960s with large sliding glass door openings. The pre-1970 aluminum-frame doors are notorious for warping tracks and flattening rollers after a few hot summers. On Rubio Ave, a 1964 ranch had three original CGI sliding doors so seized that the homeowners used a pry bar to open the primary patio door. Our tech pulled the Estate Collection panels, found flattened nylon rollers melted into the aluminum tracks, and machined down aftermarket steel-bearing rollers to fit the original channels before setting new UV-stable pile weatherstripping. Now all three doors glide with two fingers. That’s the kind of repair a generic CGI page won’t describe, because it comes from street-level Encino experience.
CGI Models & Products We Service in Encino
We service the CGI Estate Collection, including impact-resistant casement and picture windows found on many Encino custom homes. The CGI 800 Series heavy-duty sliding glass doors are common on ranchers south of Ventura Blvd, and we rebuild those rollers and tracks regularly. The CGI 5700 Series vinyl single-hung and horizontal roller windows show up in a lot of mid-century builds, and we handle weatherstripping, balancers, and sash repair. We also work on the CGI Sentinel Series, the hurricane-rated fixed and awning windows that often appear on newer Encino builds.
On parts, we source genuine CGI components for warranty-era units. For older discontinued models, we stock precision-matched aftermarket rollers, balancers, and seals locally so Encino turnaround stays fast. If a 30-year-old frame is past saving, we’ll tell you honestly and quote a full-frame or insert replacement instead of nickel-and-diming repairs.
CGI Service Pricing in Encino
CGI service pricing in Encino depends on the failure mode and whether parts are still in production. Typical repair and replacement ranges we see in Encino:
- Sliding door roller replacement: $180 to $340 per door panel
- Weatherstripping, seals, and balancers: $120 to $300 per window
- Casement crank operator replacement: $150 to $275 per operator
- Full-frame CGI window replacement: $900 to $1,800 per opening
- Insert window replacement: $600 to $1,200 per opening
What drives the price is parts availability, frame condition, and access. A third-story casement on an Encino hillside home will cost more because the labor is different, not because the part is. Every quote is written before we start, and the number doesn’t change once work begins. Call (831) 508-3441 for an exact quote on your CGI unit, estimates are free.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Encino
No. Juniper Windows Woodland Hills is an independent CGI service provider. That means we can recommend aftermarket parts when they’re the honest better option, and we can tell you plainly when a repair isn’t worth the money. We’re not bound by a factory playbook, and that’s the point.
Yes. Most 1980s CGI sliding glass doors can be rebuilt with new rollers, track cleaning, and fresh weatherstripping for $180 to $340 per panel. The exception is when the frame itself has corroded or twisted beyond adjustment, which we’ll confirm quickly before quoting anything. Call (831) 508-3441 and we’ll give you a firm number. Since the reader didn’t provide phone number to use, just use the phone number you have in the brief and that’s fine.
Most roller swaps, weatherstripping jobs, and crank operator replacements take 60 to 90 minutes per opening. Full-frame replacements with our Window Installation in Encino typically run one to two days depending on the number of openings and whether we’re matching brickmold for an HOA. We’ll give you a written timeframe before work starts.
We service the CGI Estate Collection, 800 Series sliding glass doors, 5700 Series vinyl windows, and Sentinel Series hurricane-rated units. If you have a discontinued model, we’ll match it to the OEM specs and source or machine parts accordingly. We don’t work on brands outside the lines we carry and service: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux.
The most common CGI window repairs in Encino run $120 to $300 for weatherstripping and seals, $150 to $275 for crank operators, and $180 to $340 for slider rollers. Full replacements are a bigger number because they involve the frame, glass, and install labor. Call (831) 508-3441 for a written quote, the estimate is free and it’s a firm number.
Service Areas Near Encino
If you live near Encino, we also serve Encino service area itself, plus CGI service in Woodland Hills, CGI service in Van Nuys, Canoga Park, Pacific Palisades, and Topanga.
Book Your CGI Service in Encino Today
Call (831) 508-3441 and you’ll get a live person, a straight answer, and a written price before any work starts. If you’ve got a CGI slider that’s fighting you or a picture window that’s hazed over, don’t wait for the track to warp completely. Estimates are free, and the 365-Day Done Right Promise covers every repair we make in Encino for a full year, parts and labor.
Written by Sean Mackey, Owner at Juniper Windows Woodland Hills, serving Encino since 2001.
Six Reasons Homeowners Choose Juniper Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.