New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Reseda
Door replacement in Reseda comes down to one thing most homeowners don’t expect: the openings in these 1950s and 60s ranch homes are narrower than today’s standard, which means a quote that treats your house like a new-build tract home is a red flag. We’re Juniper Windows Woodland Hills, and our crews work Reseda streets every week, from the blocks off Reseda Boulevard down to the cul-de-sacs near Sherman Way. Call us at (831) 508-3441 for a written quote before any work starts, not after.
We know the “Reseda slider” and the hollow-core entry door that swells every winter. We know which rough openings run 28 inches instead of the code-minimum 32. That local knowledge is what keeps your replacement from becoming a callback.
Why Juniper Windows Woodland Hills Is Reseda’s Preferred Door Replacement Company
Reseda homeowners don’t have patience for a contractor who shows up late with a fuzzy estimate and a crew they’ve never met. That’s why our process is built around the Relay Standard: you book, you get a live arrival time, your tech arrives in uniform with a background check already on file, and the price you were quoted in writing is the price you pay. No adjustment at the door, no “we found something” surprise.
Sean Mackey leads our team, and the standard he holds is simple. Every door we install in Reseda, from a Therma-Tru entry slab on a ranch off Saticoy to an interior door set in a condo near the Northridge border, gets the 365-Day Done Right Promise. If it’s not right within a year, we fix it. Parts and labor, in writing.
What that means for a Reseda house specifically is this: we’re not relearning your walls on the day of install. Mid-century framing moves. It settles, it warps, it shims differently than a house built in 2010. Our techs have set doors in hundreds of these homes, and honestly, the work is more tedious and more interesting than new construction. We plan for the shim packs. We expect the non-square jamb.
Reviews from Reseda customers mention the same things: the tech called when he said he would, the door fit without a gap, and the digital invoice came with before-and-after photos. We’re local enough that if something’s off, we’re back out fast. Call (831) 508-3441 and talk to a live person, any hour.
Interior Door Replacement in Reseda
Interior Door Replacement in Reseda usually means pulling an original hollow-core slab or a worn prehung unit from a hallway or bedroom and setting a new door that actually closes square. Homes here often have 28-inch rough openings, which is narrower than the 30- and 32-inch prehungs stocked at big-box stores, so custom sizing and planing are part of the job more often than not. A typical interior slab replacement in Reseda runs $180 – $420 installed when we’re working with an existing jamb, and $350 – $750 when the jamb has to go too. We’ll give you an exact figure in writing, free.
Slab Swaps on Existing Jambs
When the existing jamb is level and solid, a slab swap is the most cost-effective interior door replacement in Reseda. It means keeping the frame, routing for hinges, and fitting a new door to the footprint your house was built with. On 1950s ranch homes, this preserves the original trim lines that make the place feel period-correct.
Full Prehung Replacements
If the original door has been planed too many times or the frame has split at the hinge screws, a full prehung replacement makes more sense. We order the unit to your actual rough opening size, not the “standard” one, because Reseda’s older framing is rarely standard. Northridge-adjacent neighborhoods built in the early 1960s tend to have the most variation.
Interior Door Installation in Reseda
Interior Door Installation in Reseda is what happens when a new doorway is added or an entire room’s worth of doors goes in at once, which is common when a homeowner is converting a garage or reworking a mid-century floor plan. You might pay $400 – $800 per opening for a full install including jamb, casing, hardware, and paint-ready prep, depending on how much shimming the framing requires. New interior doors on old Reseda walls involve more than hanging a slab: we adjust reveals, set the top gap, and make sure the door doesn’t drift open on its own.
Multi-Door Installations
If you’re replacing every interior door in a Reseda ranch, scheduling all cuts and hinge mortises in one pass saves time and keeps the reveals consistent from room to room. We’ve done full-house interior door installs where five of six openings ran true and the sixth needed a quarter-inch jamb extension planed to fit. That’s just the nature of 1950s framing.
Closet and Hall Door Sets
Closet sliders and bi-folds in Reseda often sit in openings that are narrow but tall, which translates to trimmed panels and hardware that hasn’t slipped off its track in six months. We replace the track, set the door, and test it under load before we call the job done. If it hangs up on the carpet two weeks later, that’s covered under the 365-Day Done Right Promise.
Trusted Brands We Service in Reseda
We install and service doors from PGT, Therma-Tru, and ES Windows, because those are the lines that hold up to Reseda’s specific combination of heat, dust, and Santa Ana wind. For exterior doors on mid-century ranches, Therma-Tru slabs let us match a 28-inch rough opening without ordering a fully custom unit from a millwork shop. PGT gives us the impact-rated options that clear local wind-load inspections. We keep common hardware, weatherstripping, and shim stock in our vehicles so a Reseda job doesn’t stall for a part that has to ship from another state. If you already have one of these brands in your home, our Door Replacement team can evaluate whether a slab swap or a full replacement makes sense.
Common Door Replacement Problems We See in Reseda Homes
- Swollen jambs on original 1950s frames. Reseda’s mild, wet winters push moisture into unsealed jamb pockets on original ranch frames, and by February the door sticks at the top corner. The fix isn’t planing the slab to death; it’s sealing the pocket and resetting the jamb.
- Cheap retrofit inserts with fiberglass jambs that fracture. On non-square 1950s frames, a rigid fiberglass jamb gets forced into a slight parallelogram shape. It cracks, and then the gap howls during Santa Ana winds.
- Slabs with insufficient design pressure for Reseda’s wind exposure. A door with a design pressure below 40 psf is the kind of thing that passes a camera inspection and fails a real one. If a remodel triggers a wind-load inspection, that door gets a stop-work order on it.
- Hollow-core entry doors that were never meant to be entry doors. A lot of Reseda homes still have the original hollow-core front door, which is fine for a hallway and wrong for a home’s primary security and weather barrier. Replacing it with an insulated, weather-sealed slab is the single fastest upgrade for comfort and heating costs.
Pricing for Door Replacement in Reseda, CA
Here’s what a Door Replacement in Reseda actually costs. Interior slab replacement runs $180 – $420. Interior prehung replacement runs $350 – $750. Exterior entry door replacement in Reseda runs $1,200 – $2,800 for a standard-width Therma-Tru or PGT door, and $2,800 – $5,500 when the door carries an impact rating and the install includes jamb work on a narrow mid-century opening. What moves the number? Rough-opening width, the condition of the existing jamb, whether the door needs impact glazing for code, and whether we’re matching trim profiles from 1958. You’ll get a written line-item quote before anything starts. Call (831) 508-3441 to schedule a free estimate.
We Also Serve Cities Near Reseda
Our crews work throughout Reseda and the surrounding San Fernando Valley cities, including Winnetka, Tarzana, Encino, and Canoga Park. If you’re just over the border in Encino and wondering whether your door opening has the same mid-century quirks, it probably does, and we’re ready when you call.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Reseda
In Reseda, an exterior replacement door under the current California code must meet a design pressure of at least 40 psf, and doors in wind-exposed areas of the Valley can be required to carry higher ratings depending on the exact location and building type. PGT and Therma-Tru both manufacture doors rated well above that threshold, and we provide the product approval documentation with your quote so there’s nothing to guess about. Call (831) 508-3441 and we’ll pull the specific requirement for your street.
You can often keep the original jamb if it’s structurally sound, square enough to shim, and not split at the hinges, which is the case in maybe half the Reseda ranches we see. The issue is that many of these openings are 28 inches, not the 32-inch code minimum, so a standard slab won’t fit without custom planing or a jamb extension. We’ll tell you straight which way the job should go after we put a level on it. Estimates are free; call (831) 508-3441.
For Reseda’s high solar gain, an insulated glass unit with a laminated interlayer and low-E coating is the workhorse for entry doors, and it can drop the SHGC below 0.30 while keeping the clean sightlines that mid-century ranch homes were designed with. For doors with decorative glass or sidelites, we’ll spec the same glazing package in a profile that matches the period. A replacement that preserves the look and cuts the heat load isn’t a compromise; it’s the job done correctly.
Yes, in many cases. A door with a recognized wind-mitigation or impact-rating and the paperwork to prove it can qualify for windstorm loss-reduction credits on your homeowner’s policy, and the certification is what matters to the insurer. We give you the product approval documentation for the specific door we installed, which is what allows you to file the compliance paperwork. If a cheap bid doesn’t include that doc, the insurance discount disappears with it.
The most common trigger for a stop-work order is a door slab with a design pressure below 40 psf getting installed during a remodel that triggers a wind-load inspection, and the second is missing product approval documentation from the installer. The fix is simple: require your contractor to spec the door with its rating and approval number in the written quote, then verify both before anything gets installed. That’s what our quotes include by default, and it’s why cheap bids in Reseda fail the paper test before they ever fail a wall test.
If you’re in Reseda and you want a door that fits your house, not a door that fits a warehouse shelf, call us at (831) 508-3441. We’ll set a time, show up when we say, and put a real number in writing. That’s the whole offer.
Written by Sean Mackey, Owner at Juniper Windows Woodland Hills, serving Reseda and the surrounding San Fernando Valley.
Six Reasons Homeowners Choose Juniper Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.