New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Woodland Hills Homeowners Choose Mr-Glass Windows & Doors
We’re Juniper Windows Woodland Hills, and we provide independent Mr Glass in Woodland Hills windows and doors service throughout Woodland Hills, CA. We’re not a Mr-Glass dealer and we’re not authorized by the manufacturer – we’re a local contractor who diagnoses and repairs their products without ties to any brand, which means our recommendations are based on what actually works in the west Valley heat. If your Mr-Glass 6800 single hung won’t stay up or your 7800 slider sounds like it’s grinding gravel, call us at (831) 508-3441 and we’ll tell you what’s wrong and what it’ll cost to fix before we touch a screwdriver.
Woodland Hills has a particular relationship with Mr-Glass products. The brand’s aluminum frames from the 1980s and 1990s still hang in a lot of original ranch homes across Woodland Hills, especially in neighborhoods like Walnut Acres and Woodland West. Those windows have been through 40 summers of triple-digit heat, and the failures we see are consistent: seized rollers, stripped spiral balances, and pile weatherstripping that’s compressed into a hard plastic ridge. We know these failure modes by sight because we’ve fixed hundreds of them across Woodland Hills. When you call us, you’re not getting a general handyman who’ll Google “Mr-Glass window repair” while standing in your living room. You get a tech who can identify your series, your hardware, and your fix from the front porch.
Why Trust Juniper Windows Woodland Hills for Your Mr-Glass Windows & Doors?
Our crew has spent years working on Mr-Glass aluminum and vinyl frames across Woodland Hills, from original 1980s units in Walnut Acres to newer energy-efficient lines in the gated builds near Warner Center. Sean Mackey, our owner and lead installer, studied building construction technology at Los Angeles Trade-Technical College and has spent the better part of two decades measuring rough openings and fitting frames across this part of the Valley. He’s the one who insists every Mr-Glass repair gets the same treatment: diagnose the actual failure, not the symptom, then fix it with parts that match the exact profile and load rating of the original hardware.
Here’s what that means in practice. When a Mr-Glass 6800 Series single hung drops like a guillotine, the problem is almost never the frame – it’s the spiral balance tubes inside the jamb. When a 7800 Series horizontal slider won’t budge, someone who doesn’t know the product will spray WD-40 on the track and call it a day. We pull the sash, inspect the rollers, and replace what’s actually seized. And everything we do is covered by the 365-Day Done Right Promise: if the repair isn’t right, we make it right for a full year, parts and labor, in writing. No fine print, no argument.
Common Mr-Glass Windows & Doors Problems We Fix in Woodland Hills
These are the five issues we see most often on Mr-Glass products in Woodland Hills. If you recognize yours below, you’ll already know what to ask for when you call.
- Worn or cracked pile weatherstripping on Mr-Glass 6800 and 7800 sashes. Pile is the fuzzy strip that runs along the sash edges to seal air gaps. After years of San Fernando Valley heat and Santa Ana wind pressure, it flattens, cracks, or falls out entirely. You’ll feel a draft around the sash and hear rattling when the wind picks up. We replace it with a premium aftermarket pile that matches the exact profile and density of the original.
- Failed spiral balances on Mr-Glass 6800 Series single hung windows. The spiral balance is a metal tube with a twisted rod inside that counterweights your sash. When the internal spring strips or the tube binds, the sash either drops hard when you try to close it or becomes absurdly heavy to lift. This is the single most common 6800 repair we do in Woodland Hills. We install new balance assemblies matched to the sash weight and window height.
- Corroded or seized aluminum tracks and rollers on Mr-Glass 7800 horizontal sliders. If you have a 7800 that takes two hands and a hip-check to slide open, the problem is usually corrosion on the bottom track or worn rollers. Homes closer to the coast deal with salt air accelerating the oxidation, but even inland, dry heat and years of grit grinding into the aluminum track will do it. We clean, repair, or replace the track and install rollers rated for the sash load.
- Broken or brittle vinyl corner welds on Mr-Glass 5800 Series frames. Vinyl expands and contracts with heat, and Woodland Hills gets real heat. Over years, the welded corners on a 5800 vinyl frame can crack or separate, especially on wide windows that flex under UV exposure. You’ll see a small gap at the corner and maybe a water stain below it after rain. Depending on the severity, we can sometimes repair the weld; if the frame has lost structural integrity, we’ll tell you straight whether replacement makes more sense.
- Fogged insulated glass units (IGUs) on all Mr-Glass series. When the seal between the glass panes fails, moisture gets inside and fogs the window from the inside out. This happens across every Mr-Glass line after 15 to 25 years in the Valley heat. The fix is a new IGU, not a whole new window – but if the frame is also failing, we’ll lay out both costs and let you decide with real numbers in front of you.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We always check for current Mr-Glass-approved replacement parts first. When we can get the OEM piece, we use it. But the reality for older Mr-Glass units in Woodland Hills is that some parts are discontinued or backordered for weeks, and a homeowner shouldn’t live with a window that won’t lock while waiting on a supply chain. In those cases, we source premium aftermarket pile seals, spiral balances, rollers, and locks that match the exact profile, depth, and load rating of the original hardware. We don’t shave corners with parts that are close enough – we spec them to the window sitting in your opening.
And we’re honest about when repair stops making financial sense. If your Mr-Glass frame has visible corrosion, or the insulated glass has failed and the frame is over 20 years old, we’ll tell you that our Window Replacement services with a current Mr-Glass-compatible insert is the better long-term move. We’d rather lose a small repair job than take your money twice. Call (831) 508-3441 and we’ll assess what you have and give you a written price either way.
Our Mr-Glass Service Process – Step by Step
Every Mr-Glass service call in Woodland Hills follows the same four steps, so you know what’s happening before we start and after we leave.
- 1
Diagnosis. We inspect the window in place, then pull the sash when needed. For a 6800 single hung that won’t stay up, we check the balance tubes before touching the weatherstripping. For a 7800 slider that’s stuck, we inspect the rollers and track before reaching for any lubricant. The diagnosis determines the fix, not the other way around.
- 2
Repair or replacement. We install OEM parts when available, or properly spec’d aftermarket matches when OEM is backordered. Every replacement – roller, balance, pile seal, lock, or IGU – is matched to the specific Mr-Glass series in your frame. We never force-fit hardware from a different window line.
- 3
Testing. We operate the sash at every position. For a single hung, that means full travel up and down with the sash staying wherever you leave it. For a slider, it means smooth travel with no drag, tilt, or binding. We also check the lock engagement and run a paper test along the weatherstripping to confirm the seal closes tight.
- 4
Warranty. Every Mr-Glass repair we complete in Woodland Hills is covered by the 365-Day Done Right Promise. If the same issue comes back within a year, we fix it again at no charge. The coverage is in writing on every project.
Get the numbers right the first time, or you’re caulking over somebody else’s mistake. That’s how Sean puts it, and it’s the standard every tech on our crew works to.
Mr-Glass Products We Service & Install in Woodland Hills
We work on the full range of Mr-Glass product lines we see in Woodland Hills homes, including the 6800 Series Single Hung Aluminum Window, the 7800 Series Horizontal Slider Aluminum Window, the 5800 Series Single Hung Vinyl Window, and the 9000 Series Casement Aluminum Window. That covers most of what builders put into Valley homes from the 1980s through the early 2000s. We stock common replacement pile, balance tubes, rollers, and lock hardware for these series locally, which means faster turnaround on most repairs. For insert window replacements and energy-efficient upgrades, we can order the right Mr-Glass-compatible products and install them on our standard written-price guarantee.
On the service side, we handle insert window replacement, energy-efficient upgrades, and window maintenance and care for existing Mr-Glass units. If your frames are solid but your glass is dated, an energy-efficient insert replacement gets you Low-E coating and dual-pane performance without pulling the entire frame. For Woodland Hills summers that regularly pass 100°F, that upgrade pays for itself in comfort before the utility savings even show up.
We Also Service These Brands
While this page covers our Mr-Glass work, we’re not a single-brand shop. We also service and install PGT, CGI, CWS, and ES Windows products across Woodland Hills and nearby areas like Mr Glass service in Encino, along with our other lines. If you have a mix of brands in your house – and plenty of Valley homes do – you’re not juggling three contractors. One call covers it.
FAQs – Mr-Glass Windows & Doors Service in Woodland Hills
Direct answers to the questions Woodland Hills homeowners ask us most about Mr-Glass service.
No. We’re an independent Mr-Glass service provider in Woodland Hills, which means we can diagnose and repair their products but we don’t represent the manufacturer and we don’t speak on their behalf. That independence is the point – our repair recommendations are based on what works in Southern California’s climate and what keeps your home’s performance intact, not on what a manufacturer wants us to sell.
The spiral balance tubes inside the jamb have failed. Those springs counterweight the sash, and when they strip or bind, the window loses its hold and drops hard. This is a common failure on the Mr-Glass 6800 Series after years of heat cycles in Woodland Hills. We replace the balances with units matched to your sash weight, and the window holds at any height again. Call (831) 508-3441 for an exact diagnosis and written quote.
Yes. In almost every case, the rollers have seized or the bottom track is corroded from years of grit and heat exposure. We pull the sash, inspect the rollers and track, and replace what’s failed. In homes near the coast or in areas like Mr Glass in Van Nuys, salt air accelerates the oxidation, but the fix is still straightforward: clean track, new rollers rated for the sash load, and the slider glides.
Sometimes. A broken corner weld on a 5800 vinyl frame can sometimes be repaired if the frame hasn’t lost structural integrity. If the corner has separated to the point where the frame is compromised, replacement is the honest call. We’ll assess it and give you a written price for either path before we start. Call (831) 508-3441 and we’ll come take a look.
We check Mr-Glass-approved sources first. When parts are discontinued or backordered, we source premium aftermarket pile seals, balances, rollers, and locks that match the exact profile and load rating of the original hardware. We’ve installed hundreds of these on 1980s and 1990s Mr-Glass units across Woodland Hills, and they hold up.
Repair work on Mr-Glass units in Woodland Hills typically runs from $180 to $450 for common fixes like balance replacements, roller swaps, and weatherstripping. Insulated glass unit replacement runs higher, usually $350 to $900 depending on the glass size and Low-E coating. Full insert window replacements start around $900 per opening and go up based on product line and options. These are ballpark ranges – call (831) 508-3441 for a written line-item quote after we inspect your window. Estimates are free.
No. A fogged or broken insulated glass unit can be replaced on its own as long as the frame is still sound. We install a new IGU and keep your existing frame. You only need full replacement when the frame itself has failed – corrosion on the aluminum or broken corners on the vinyl – or when the glass failure coincides with a frame that’s near the end of its service life. We’ll give you both numbers and let you decide.
Most common Mr-Glass repairs in Woodland Hills – a balance replacement, roller swap, or weatherstripping refresh – are completed in a single visit of one to two hours. IGU replacements take longer because the glass is ordered to size, typically a few days to a week. Insert replacements are scheduled per project. Call (831) 508-3441 and we’ll give you a realistic timeline for your specific fix.
If you’re the original owner and your Mr-Glass window is still under the manufacturer’s warranty, we recommend contacting Mr-Glass first. For windows out of warranty – and that’s most of what we see in Woodland Hills – our service won’t affect any existing coverage because there isn’t any. Our work carries its own 365-Day Done Right Promise, in writing, parts and labor.
Book Your Mr-Glass Service in Woodland Hills, CA
You know the failure mode. You know the fix. Now get the written price. Call Juniper Windows Woodland Hills at (831) 508-3441 and schedule your free Mr-Glass service estimate today – a real person answers, every time, and you’ll have a locked price in writing before any work starts.
Written by Sean Mackey, Owner and Lead Installer at Juniper Windows Woodland Hills, serving Woodland Hills and the surrounding west Valley since 2001.
Six Reasons Homeowners Choose Juniper Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.