New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Window Replacement: The Woodland Hills Owner’s Guide
We stock and install Mr-Glass-compatible window replacements throughout Woodland Hills, with most installed jobs running $480 to $1,150 per window depending on glass package and frame work. We carry the common Mr-Glass glazing units and hardware on our trucks, so a straightforward swap is usually done in a single visit. Most owners discover the failure the same way: a window that fogs between the panes in the morning, a latch that suddenly won’t catch, or a draft that wasn’t there last winter.
Which Mr-Glass Models This Applies To
Mr-Glass builds windows in two primary frame families: their aluminum-frame series (common in 1970s-through-1990s Woodland Hills homes, especially around Warner Center and the older pockets south of Ventura Boulevard) and their vinyl series that came later. You’ll find the model identifier on a small sticker or etching on the spacer bar between the glass panes, or on the frame’s edge near the sash lock. We match the replacement based on two measurements: the visible glass width and the overall frame thickness. Here’s the gotcha we see regularly in Woodland Hills: Mr-Glass aluminum frames use a slightly narrower glazing pocket than the PGT or CGI equivalents, so a generic insulated glass unit won’t seat properly. We order OEM-spec glass when the original warranty or the frame condition calls for it, and use a quality aftermarket equivalent when the frame is sound but the original glass spec is discontinued. Both look and perform identically from the street.
Signs Your Mr-Glass Window Replacement Is Failing
- Condensation or haze between the glass panes. The desiccant seal around the insulated glass unit has failed. Woodland Hills heat cycles stress these seals yearly, and once moisture is inside, no cleaning fixes it.
- A sash that sticks, drops, or won’t stay open. The balance springs in the side channels wear out. Mr-Glass vinyl models from the early 2000s are especially prone to this after 15-plus years of west Valley temperature swings.
- A draft you can feel around the frame even when the window is latched. The compression weatherstrip has flattened. In Woodland Hills, the dry heat does this faster than coastal air.
- A lock or latch that binds or won’t engage. Aluminum frame corners work loose over time, pulling the hardware out of alignment. It’s a small part, but it means the window isn’t actually sealing.
- Visible pitting or bubbling on the glass coating. Low-E coatings fail eventually. Once the coating starts separating, the glass performance drops noticeably in direct afternoon sun.
Replacement Cost & What’s Included
Here’s the honest math for a Woodland Hills Mr-Glass window replacement, installed:
| Scope | Installed Price Range |
|---|---|
| Single insulated glass unit replacement, standard size | $480 – $720 |
| Single window with new weatherstripping and hardware | $650 – $900 |
| Full sash rebuild with new glazing and balance springs | $800 – $1,150 |
The price moves based on how much frame work is needed, not on how busy the calendar is. Every quote includes the part, the labor, disposal of the old glazing, and a written price before we touch anything. Our work is covered by the 365-Day Done Right Promise: if something isn’t right within a year, we make it right, parts and labor, in writing.
DIY or Call Us?
There’s an honest split here. You can safely identify a failed seal yourself: fog between the panes you can’t wipe away, a window that feels hotter than the others in summer, or a frame corner you can wiggle by hand. Document those signs and you’ll have a clearer picture of the scope. What we don’t recommend is pulling the glass yourself. An insulated glass unit under pressure can break unexpectedly, and the edges are sharp enough to send you to urgent care. The glazing pocket on Mr-Glass frames is unforgiving; a replacement forced in at the wrong angle cracks or leaks within months. Sean Mackey has done this work across Woodland Hills since long before the Warner Center towers changed the skyline, and the rule on our crew is simple: get the numbers right the first time, or you’re caulking over somebody else’s mistake. If you suspect a failing Mr-Glass window, call us at (831) 508-3441 and we’ll diagnose it from photos before we ever schedule a visit.
FAQs
Expect 15 to 25 years from aluminum-frame Mr-Glass windows and 20 to 30 years from vinyl, with seals in the Woodland Hills climate typically failing on the earlier end of that range. The west Valley heat accelerates seal failure faster than coastal air.
A failed seal can sometimes be defogged cosmetically, but the insulating gas is gone and the window won’t perform like it did. We replace the glazing unit, which restores the full insulation value.
A standard glass-only swap takes one to two hours once we’re on site. A full sash rebuild with new balances and weatherstripping is usually three to four hours. We’ll give you a specific arrival window before we come, and you can track our ETA live.
We stock common Mr-Glass glazing sizes and hardware on our trucks. If we need to order a specific size, it’s typically three to five business days from our supplier. Call (831) 508-3441 and we’ll confirm stock for your exact window before we schedule.
Written by Sean Mackey, Owner & Lead Installer, Juniper Windows Woodland Hills at Juniper Windows Woodland Hills, serving Woodland Hills and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.