New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Horizontal Roller Windows in Woodland Hills, CA
Horizontal roller windows in Woodland Hills typically cost $450 to $1,100 per window installed, depending on size, frame material, and glass package. Most replacements run about a day for a standard 3-to-5-window project when the existing openings are in solid shape. At Juniper Windows Woodland Hills, every horizontal roller window job gets a written price before we start, and the work is covered by our 365-Day Done Right Promise, parts and labor, in writing.
Horizontal roller windows, sometimes called sliding windows or gliding windows, open side to side along a track instead of cranking out or tilting up. One sash stays fixed while the other glides horizontally. They’re a practical choice for wide openings, tight spaces where a swinging window would bump into a walkway or patio furniture, and Woodland Hills homes that want open airflow without losing interior floor space. If you’re weighing options for a specific room, our Window Installation in Woodland Hills guide walks through the full comparison of window styles, framing, and glass packages side by side. Or you can call us at (831) 508-3441 and talk through your opening dimensions with a real person, any time.
We’re the windows-and-doors specialist inside the Relay Home Co. family, founded in 2001. Sean Mackey runs our Woodland Hills operation, and every installation follows the same relay standard: a live arrival time you can track, before-and-after photos on every job, a written price, and a digital invoice you pay from a link. No four-hour windows. No vague estimates. No surprises at the door.
Key Takeaways
- Cost in Woodland Hills: $450 to $1,100 installed per window for most horizontal roller replacements.
- Best for: Wide openings, low-traffic spots like above kitchen counters, and anywhere a swinging sash would be in the way.
- Why it matters here: Horizontal rollers are excellent for capturing Woodland Hills afternoon breezes, especially on south-facing walls.
- What you get with us: Written price before work starts, 365 days parts and labor guarantee, live arrival tracking.
- Phone: (831) 508-3441, answered by a live person 24/7.
When You Need Horizontal Roller Windows
Horizontal roller windows solve specific problems that other window styles don’t. Here’s when our Woodland Hills customers most often choose them over casement, double-hung, or picture windows.
- The opening is wider than it is tall. A 60-inch-wide kitchen window over the sink is awkward for a double-hung and nearly impossible for a casement. A horizontal roller splits that span naturally into two sashes and keeps the view clear.
- You want airflow without exterior obstruction. Casement windows swing outward, which means they conflict with patio covers, walkways, shrubs, or egress paths common in Woodland Hills yards. A roller stays within the wall plane, period.
- You’re replacing old aluminum sliders from the 1970s or 1980s. A huge share of homes in the neighborhoods south of Ventura Boulevard were built with single-pane aluminum sliders. Those frames flex, the tracks clog with dust from the 101, and the rollers wear flat. If the sash sticks or scrapes when you slide it, the track hardware is done.
- The room has a low sill height. In living rooms and dining rooms where a window starts near the floor, a horizontal roller maximizes glass area without requiring the vertical lift of a double-hung.
- You want impact-rated glass without a heavy crank mechanism. Impact-rated horizontal rollers with laminated glass handle Santa Ana wind-driven debris and still glide easily because the load rides on the track, not on a hinge.
- You’re tired of propping open a sash with a stick. Old sliding windows lose their balance or the latch fails and the sash drifts shut. A new roller mechanism with a modern latch stays where you put it.
If you’ve got two or three of these happening at the same time, replacement makes more sense than repair. And in Woodland Hills, a failed track or a bent frame on an old slider isn’t worth band-aiding. Call (831) 508-3441 and we’ll tell you straight whether the window needs a roller replacement or a full new unit, with a written price either way.
Our Horizontal Roller Windows Process
Here’s exactly how a horizontal roller window replacement goes with Juniper Windows Window Installation Near Me in Woodland Hills, CA. This is the same process on every job, from a single window in a Woodland Hills condo to a five-window retrofit on a ranch home north of Mulholland.
- Measure and assess. We measure your existing openings, check the level of the sills, inspect the condition of surrounding stucco or siding, and identify any water intrusion from the old window. This step tells us whether you need a like-for-like replacement or a full tear-out.
- Written price. You get a line-item price for the window, installation, trim, and any stucco or drywall repair. That number is locked. It does not change after we start. You approve it in writing before a single screw turns.
- Product selection. We configure your horizontal roller around your opening size and look. Frame options include vinyl or aluminum, glass options include low-E, dual-pane, or impact-rated systems from manufacturers like PGT and CGI. If you want to match existing sightlines, we’ll show you sample frames and explain U-factor and solar heat gain coefficient numbers in plain terms.
- Installation. Our background-checked, uniformed technicians arrive with a live arrival time you can track. We remove the old window, clean the opening, set the new frame, level it, insulate the rough gap, and install trim. Before-and-after photos document the entire job.
- Walkthrough and digital invoice. You inspect the window with the tech, we clean the site, and you pay from a digital invoice link. The work is registered under the 365-Day Done Right Promise.
If anything about the install isn’t right within 365 days, parts and labor, we come back and make it right. And if a repair we perform fails, the second visit is free. No charge, no argument.
Horizontal Roller Windows Pricing in Woodland Hills
Replacement horizontal roller windows in Woodland Hills run $450 to $1,100 per window installed for standard sizes. Here’s where that range comes from, in actual line items so you’re not guessing.
| Component | Ballpark Range |
|---|---|
| Vinyl horizontal roller window, standard size (36″ x 48″) | $300 to $550 |
| Impact-rated horizontal roller window (PGT or CGI) | $650 to $1,100 |
| Aluminum frame, thermally broken, standard size | $500 to $800 |
| Labor and installation per window | $150 to $300 |
| Stucco or drywall repair, if required | $50 to $200 per opening |
Your specific price depends on four things. First, the window’s rough opening dimensions. A 72-inch-wide slider costs more than a 36-inch unit, but not proportionally more, because the labor and track hardware stay similar. Second, the glass package. Dual-pane low-E is the baseline for the Woodland Hills climate. Impact-rated glass, which is built to resist wind-borne debris without shattering, adds meaningful cost but is worth considering if your home sits on a ridge road or faces an open canyon where Santa Ana wind loads hit hardest. Third, the frame material. Vinyl is the most cost-effective; thermally broken aluminum runs higher but allows thinner sightlines. Fourth, any scope beyond the window itself: rotted trim, water-damaged framing, or stucco patching.
What you won’t see in our pricing is a low-ball estimate that grows at the door. Sean Mackey signs off on every quote. The number you approve is the number you pay. Call (831) 508-3441 for a free estimate on your specific openings, and we’ll have a technician out with a written price, usually same week.
Horizontal Roller Windows vs. Other Window Styles in Woodland Hills
If you’re deciding between a horizontal roller and something else, here’s the honest comparison based on what we see across Woodland Hills homes.
Horizontal roller vs. casement
Casement windows seal tighter because the sash compresses against weatherstripping when cranked shut. That makes them a favorite for energy efficiency. But casements swing outward, which is a problem over walkways, under low eaves, and next to patios where a swung-open sash becomes a head hazard. A horizontal roller keeps the opening flush with the wall. For max airflow, casements win because they capture side breezes; for convenient operation in constrained spots, rollers win. Both are available in impact-rated versions from PGT and CGI.
Horizontal roller vs. double-hung
Single & Double Hung Windows open vertically, which is great for bedrooms and spaces where you want top-down ventilation. But double-hungs have a sash that sits in a track and a balance system that can wear. For wide living-room openings, a horizontal roller delivers a cleaner, more panoramic sightline because there’s no center rail splitting the view. In Woodland Hills, we frequently install horizontal rollers in living rooms and family rooms, and double-hungs in bedrooms.
Horizontal roller vs. picture window with transom
If you want a big fixed view and only a little ventilation, a picture & fixed windows setup with an operable transom might make sense. But in the warmer stretch from May through October, fixed glass can make a Woodland Hills room feel still. A horizontal roller gives you both a large glass area and real airflow.
Horizontal Roller Windows for Woodland Hills-Specific Conditions
Woodland Hills has a climate that punishes windows slowly. Hot, dry summers with weeks over 90 degrees. Cool, damp winter mornings. Santa Ana wind events in the fall with gusts strong enough to rattle older frames. And the 101 corridor’s fine dust, which settles into window tracks constantly.
We see the same failure patterns repeat across neighborhoods: warped vinyl tracks on south-facing walls that get direct August sun, pitted aluminum frames near Victory Boulevard where vehicle dust kicks up, and failed roller bearings on second-story windows that get hit hard by wind-driven grit. If you live along the southern slope above the 101, or in a pocket of the neighborhood that funnels Santa Ana wind, impact-rated horizontal rollers from a manufacturer like ViewLux or CGI are a legitimate upgrade, not an upsell.
We also talk openly about U-factor and solar heat gain coefficient on these jobs. A horizontal roller with a good low-E coating significantly cuts cooling load on west-facing walls in the summer. That’s not product brochure language. It’s physics, and in Woodland Hills, it shows up on the power bill.
Brands We Install: Horizontal Roller Options from PGT, Therma-Tru, ViewLux, and CGI
Juniper Windows Woodland Hills has access to eight product lines, and we configure horizontal rollers from several of them depending on what your opening needs. We don’t push one brand on every job because no single manufacturer is the right answer for every wall orientation, wind exposure, and budget. We match the product to the project.
PGT and CGI build impact-rated horizontal rollers designed for wind-borne debris regions, which applies to a meaningful share of Woodland Hills homes, especially those on canyon edges and ridgelines. Therma-Tru, better known for doors, also offers a window line we configure for energy-focused replacements where the entry door and window aesthetic need to match. ViewLux gives us a path for slim-sightline aluminum horizontal rollers when you want more glass and less frame.
The right window for your house is a function of your opening size, your sun exposure, your wind exposure, and your budget. We’ll show you the actual sample in hand, explain the numbers, and then let you choose. No pressure, just facts.
Why Woodland Hills Homeowners Choose Juniper for Horizontal Roller Windows
We’re not a general contractor who “can also do windows.” Juniper Windows & Doors specializes in window replacement, window installation, and door replacement. That’s the whole trade. Sean Mackey’s team in Woodland Hills does not take on bathroom remodels, roof patches, or deck builds. Horizontal roller windows are what we do all day.
That narrow focus matters in a few ways. We see the same stucco profiles, the same old aluminum slider failures, and the same rough-opening quirks week after week, so our measuring and installation are dialed in. Our technicians are background-checked and wear uniforms. You know who’s walking to the door. We answer our phones live 24/7, no voicemail maze. And the whole experience runs on The Relay Standard: book in a tap, live arrival time, before-and-after photos, written price, digital invoice.
And the name isn’t random. Juniper is a hardy evergreen built to handle sun, wind, and cold. Fitting name for what windows and doors have to endure in Woodland Hills.
FAQs – Horizontal Roller Windows
How much does it cost to replace a horizontal roller window in Woodland Hills?
Expect $450 to $1,100 per window installed for standard horizontal roller replacements in Woodland Hills. Vinyl with dual-pane low-E glass lands at the lower end; impact-rated models from PGT or CGI push toward the upper end. Call (831) 508-3441 for an exact quote, free of charge.
Can you replace just the rollers or the track instead of the whole window?
Yes, in some cases replacing the roller assembly or the track hardware solves the problem for $120 to $250, but that only works if the frame is still square and the glass is intact. If the frame is warped or the seal has failed, a full replacement is the honest fix. We’ll tell you which path is right and give you a written price either way. Call (831) 508-3441 and we’ll assess it.
Are horizontal roller windows energy efficient in the Woodland Hills climate?
Modern horizontal rollers with dual-pane low-E glass and insulated frames perform well in hot, dry climates. The key numbers to look at are the U-factor and solar heat gain coefficient on the specific model. For west-facing Woodland Hills walls, a lower SHGC matters more than a lower U-factor. We’ll explain both numbers on any window you’re considering.
How long does horizontal roller window installation take?
A standard 3-to-5-window horizontal roller replacement in Woodland Hills typically takes one to two days, depending on stucco repair and access. We’ll give you a written time estimate and a live arrival time before the crew shows up, and we document the work with before-and-after photos.
What is the warranty on your horizontal roller windows?
Every horizontal roller window installation includes our 365-Day Done Right Promise, parts and labor, in writing. If something isn’t right within a year, we fix it. And if a repair we perform fails, the second visit is free. Your specific window also carries the manufacturer’s warranty from the brand you choose, whether that’s PGT, CGI, ViewLux, or Therma-Tru.
Written by Sean Mackey, Owner at Juniper Windows Woodland Hills, serving Woodland Hills.
Six Reasons Homeowners Choose Juniper Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.