CGI Window Replacement Nationwide

CGI Window Replacement: The Woodland Hills Owner’s Guide

If you have a CGI window that’s fogged, cracked, or won’t seal, we can match and replace it. Installed replacement for a single CGI window in Woodland Hills typically runs $850 to $1,900 depending on the series, glass package, and frame condition. We stock common CGI hardware and weatherstripping on our trucks, and we can have most replacement sashes and insulated glass units ready within 5 to 7 business days.

Call (831) 508-3441

Most Woodland Hills homeowners find out the hard way. You notice condensation between the panes one morning, or a crank handle snaps off in your hand, or the window just won’t close flush against the frame anymore. By the time you’re searching online, you’ve probably already tried to ignore it for a few weeks. That’s normal. Here’s how to figure out exactly what you need.

Which CGI Models This Applies To

CGI builds heavy, impact-rated aluminum and vinyl windows designed for hurricane zones, which means they’re overbuilt for most of what Woodland Hills throws at them. The most common series we see in the west Valley are the Estate Collection, the Sentinel line, and the older CGI 900 series that went into a lot of 1990s and early 2000s remodels. Each series has its own extrusion profile, glazing bead, and hardware set, so a part from one line rarely fits another.

Here’s the compatibility gotcha that trips up a lot of owners: CGI changed its glazing bead profile on certain Estate Collection windows around 2014. If your window predates that change, the newer snap-in bead won’t seat correctly, and you’ll either get air leaks or a bead that pops back out within a year. We check the date code etched on the spacer bar inside the glass, or the label on the top of the sash, before we order anything.

On the OEM versus aftermarket question: we use genuine CGI parts when the window is still under warranty or when the part is structural, like a sash corner key or a mullion clip. For hardware that wears predictably, like crank mechanisms and cam locks, we’ve had good results with quality aftermarket equivalents from the same manufacturers CGI uses for its hardware lines. You get the same function for about 30% less on average. We’ll tell you which parts make sense to go genuine on and which ones don’t, and we’ll put that in the quote before you pay anything.

Signs Your CGI Window Replacement Is Failing

• Condensation or haze between the glass panes. This means the insulated glass unit’s seal has failed at some point along the spacer bar. In Woodland Hills, the heat cycling between hot days and cool nights stresses those seals year after year, and once moisture gets inside, the only fix is new glass. It won’t dry out on its own.
• The window won’t stay open or is harder to crank. On casement and awning windows, the crank mechanism’s gears are zinc or pot metal and they wear smooth over time, especially on heavy impact-rated sashes. If you feel a slip or hear a grinding noise when you crank, the operator is on its way out.
• Visible gaps or daylight around the sash. Compression weatherstripping and pile weatherstripping flatten permanently after years of compression. Once you can see light through the gap, the window is leaking air constantly, and your AC in a Woodland Hills summer is working harder than it should.
• Water stains or soft spots on the interior drywall below the window. This is usually the result of a failed outer seal or a cracked frame weld, not the glass itself. In a stucco-heavy area like Woodland Hills, water can sit in the rough opening long enough to do real damage before you ever notice the stain.
• The window is cracked but hasn’t shattered. CGI’s impact glass is designed to take a hit and hold together, which is exactly what it does. But a cracked impact window is compromised glass, and the next impact, even a mild one, turns a crack into a full failure. Replace the unit as soon as you see the crack, not after.

Replacement Cost & What’s Included

For a standard CGI window replacement in Woodland Hills, you’re looking at these installed price ranges:

• Single operable window (casement, awning, or single-hung), impact glass, same-size swap: $850 to $1,300
• Single fixed window or picture window, impact glass: $600 to $1,100
• Larger fixed windows, doors, or multi-panel units: $1,400 to $2,300

The range depends on the frame condition. If the existing CGI frame is square, undamaged, and we’re just doing a pocket replacement (new sash and glass into the old frame), you’re at the lower end. If the frame has corrosion, water damage, or was installed out of square, we’re doing a full frame replacement, which adds tear-out, disposal, and new flashing.

Every quote includes the part, labor, disposal, and any trim or caulking needed to finish the job clean. You get a written, line-item price before we start, and the 365-Day Done Right Promise covers the work. If something isn’t right within a year, we fix it. Parts and labor. In writing.

DIY or Call Us?

If your CGI window is hard to operate or you see condensation, there are a couple of things you can safely check yourself. Confirm the window is fully closed before cranking. Look for debris in the track and clean it out. Check that the locking points line up. Those are the easy ones.

What we’d tell you not to do is what we said at the start: don’t try to swap an impact-rated window’s glass yourself. These units are under load and they are heavy. A dropped impact sash doesn’t just crack the glass, it can shear through the wall below it. Getting the glass square in the frame, resetting the glazing bead, and shimming the unit so the operable sash aligns correctly is the part where we earn the money.

If any of this sounds like your window, call us at (831) 508-3441. We’ll ask a few questions, give you an honest read over the phone, and get a written estimate scheduled.

FAQs