New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Window Replacement: The Woodland Hills Owner’s Guide
If you have a PGT window with a failed sash, fogged glass, or stripped hardware in Woodland Hills, we stock the replacement components and install them typically for $240 – $680 per window, depending on the part and your PGT series. Most swaps take under an hour once we’re on site, and we carry the common failure points on our trucks: sash balances, rollers, cam locks, weatherstripping, and insulated glass units for PGT’s 200, 550, and 700 series lines. Here’s how owners usually find us: the window won’t stay up, it’s drafty even when closed, or the seal has given out and there’s permanent haze between the panes that no amount of Windex touches.
We’re an independent window and door company serving Woodland Hills, not a PGT subsidiary or authorized factory service center. That matters for one reason: we’re not beholden to factory lead times, so when PGT’s warranty path takes six weeks, we can usually have your window functioning in days.
Which PGT Models This Applies To
PGT’s catalog breaks into three families you’ll actually encounter in Woodland Hills homes: the 200 Series (single-hung, aluminum, common in mid-century and 1980s runs through neighborhoods south of Ventura Boulevard), the 550 Series (vinyl single- and double-hung, the workhorse for late-90s through early-2010s construction around Warner Center and the Valley Circle corridors), and the 700 Series (impact-rated vinyl, heavy, built for wind-borne debris, found on custom builds and remodels in the hillside pockets above Mulholland).
Before we order anything, we locate the factory label etched or stamped on the spacer bar between the glass panes, or on the frame head. It carries the series number, the glass makeup, and the manufacturing date. PGT etches this in small type, but it’s there. If the label’s worn off, we measure the visible glass opening to the sixteenth of an inch and match the frame profile against our reference set. That last step is where the wrong internet order turns into an expensive return: PGT’s 550 and 700 shorelines are visually close, but the glazing pocket depth differs by about 1/8 inch, and a sash from one will not seat in the other.
Signs Your PGT Window Replacement Is Failing
- The sash won’t stay up (or slams shut). Failure of the constant-force balance springs or the block-and-tackle balances. These have a lifespan, and in the temperature swings of the west Valley, that lifespan shortens. The mechanism gets weak or the cord snaps, and the window loses its counterweight.
- Haze, fog, or condensation you can’t wipe off. Seal failure in the insulated glass unit. The argon or krypton fill has leaked out, and outside air is now between the panes. This doesn’t get better, only worse, and left alone it degrades the glass coating.
- You feel a draft even when the window is locked. Compression weatherstrip on the sash has flattened out or torn. PGT’s pile and fin weatherseal does not bounce back after five to seven years in the San Fernando Valley heat; it goes limp and air moves through it.
- Rollers are grinding, skipping, or the window binds in the track. The sash rollers (on horizontal sliders) or the tilt latch shoes (on hung windows) have worn or gummed up with oxidized dust from the hillside winds. Forcing the window usually bends the roller housing and doubles the repair cost.
- The lock doesn’t engage, or engages but still gaps. The cam lock’s strike plate or the keeper has drifted out of alignment, usually because the frame or the sash has settled a millimeter. The window seals fine in one spot and leaves a gap at the other.
Replacement Cost & What’s Included
In Woodland Hills, expect these installed ranges for PGT-compatible work:
- Balance replacement (springs/cords): $180 – $310 per sash
- Cam lock & keeper replacement: $80 – $150 per lock set
- Weatherstripping restore (full perimeter): $120 – $220 per window
- Roller set replacement on a slider: $140 – $250 per panel
- Insulated glass unit replacement: $390 – $680 per sash, depending on glass pack and whether the sash is impact-rated
What moves the number: the specific PGT series, the glass make-up (a 700 Series impact window with laminated glass costs more than a 200 Series clear single), and whether the sash itself is reusable. We deliver a written price before any work starts – no “we’ll see when we open it up.” The 365-Day Done Right Promise from Juniper means if the replacement fails within a year, parts and labor to fix it are on us. In writing.
DIY or Call Us?
Some of this work is genuinely DIY-safe. You can replace a cam lock or keeper with a screwdriver and ten minutes. You can inspect weatherstripping by running your hand along the sash on a windy day. I’m going to be straight with you: balance springs, especially block-and-tackle balances under tension, are where DIY goes sideways fast. Those springs hold the entire weight of a sash, and removing one without releasing the tension can send parts flying. That’s not a scrape-your-knuckle risk; it’s a real injury risk, and we’d rather you not open that housing without the right tool. If the sash won’t stay up and you’re not 100 percent sure of what you’re looking at, call us at (831) 508-3441. We’ll identify the part and quote the swap over the phone, and it usually fits in one visit.
FAQs
Balances and weatherseal last about seven to ten years in the San Fernando Valley’s heat before they lose function; insulated glass units run fifteen to twenty years before seal failure is common. Homes on hillsides above Mulholland with heavier sun and wind exposure tend to wear through weatherstripping a year or two sooner.
See something failing? Call (831) 508-3441 and we’ll tell you what’s worth fixing now and what can ride another season.
Some can. A sticky lock is often an alignment fix, not a part swap. A sagging sash roller can sometimes be cleaned and reset. But a fogged insulated glass unit and a snapped balance spring are replacement items, not repairs. If we can make it right without a new part, we’ll tell you that and save you the money. Call (831) 508-3441 for an honest read on yours.
Most single-window swaps – balances, locks, weatherstripping, glass units – take 45 to 90 minutes on site, start to finish. We quote a window of time for the visit, not just a day, and you get a live arrival tracking link before we show up. Call (831) 508-3441 to lock an appointment.
Yes, but not every series. We carry the common failure items for PGT’s 200, 550, and 700 lines on the vehicle, because those are the windows we see most in Woodland Hills. If yours is a less common variant, we measure on the first visit and typically install within a few days. Call (831) 508-3441 – we can usually tell from your description whether it’s a same-trip fix.
Ready to Get Your PGT Window Working Right?
Call (831) 508-3441 and you’ll get a live person, not a voicemail. We’ll ask what the window is doing, what the label says if you can read it, and give you a straight price range before the truck rolls. Sean and the crew at Juniper Windows Woodland Hills have been keeping PGT windows square in this valley for years, and we do one thing differently than the rest: a written price before any work starts, every single job. If it’s not right, the 365-Day Done Right Promise makes it right – in writing.
Get the numbers right the first time, or you’re caulking over somebody else’s mistake. Call (831) 508-3441 to schedule your free estimate.
Written by Sean Mackey, Owner & Lead Installer, Juniper Windows Woodland Hills at Juniper Windows Woodland Hills, serving Woodland Hills and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.